Oregon Auto Shops’ Labor Rates Surge by 25% Since 2021

The Northwest Automotive Trades Association conducted the survey, which shed light on what Oregon shops are charging for various services.

Oregon-auto-repair-shop-rates-2024

A survey conducted earlier this year by the Northwest Automotive Trades Association (NATA) showed the general shop labor rate is up statewide to about $151, a 25% increase from 2021, the last time the survey was conducted.

NATA said it distributed the survey to more than 500 shops throughout Oregon, both members and non-members of the association. More than 100 shops participated. Those shops averaged just under seven full-time employees each, including an average of 4.3 fulltime production employees and 2.5 fulltime office staff.

In addition to finding a 25% increase in the general shop labor rate, the survey found:

Shops tend to charge slightly more than their general labor rate for diagnostic work. There is even more range in diagnostic rates shop to shop, from a low statewide of $95 to a high of $239 per hour.

Of shops charging a flat fee for an oil change -- as about two-thirds of shops do -- the average was $60, up nearly 18% since 2021. Of those charging based on a labor rate, the average labor rate was $90, up nearly 70% from three years ago. NATA noted the sample size for this category was quite small.

There is significant variance in how much shops mark-up prices on parts. Mark-up on used parts is fairly consistent across the state, with shops typically charging a customer about $156 for a used part that costs the shop $100; this has remained mostly unchanged since 2017. But the customer charge for a $100 new OEM part ranges from a low of $105 to a high of $250. The range in mark-up on aftermarket parts is even wider, from a low of
$112 to a high of $242. Some shops noted that some of their parts pricing is based on list prices for the parts.

More than one-third of shops statewide are not charging for hazardous waste disposal. Of those charging a flat-fee per work order for it, the statewide average is about $7, up about $3 from 2021.

There is also wide variation in how shops charge for shop supplies. The flat-fee used by some shops averages about $7, while other shops base the charge as a percentage of labor, typically between 4% and 5%, and often with a cap.

The statewide data findings have a margin of error of about 10%. This means that, if the statewide average labor rate was found to be $100, there is 95% confidence the actual average is between $90 and $110. Geographic regional data may have higher or lower margins of error based on sample size.

webinar for SATA

Fix Finish Flaws at the Source

Learn the right way to set up your spray gun, reduce paint waste, boost atomization, and increase quality. Click below to watch this On-Demand Webinar.

Watch Now

Shop & Product Showcase

  • Read testimonials from real collision repair shops about the tools and technologies they use to get the job done.