Click HERE to download a PDF of this article.
- Cycle time is usually measured in terms of days from vehicle drop off to vehicle pick-up. What has come to be known as “keys to keys.” As I said, knowing your keys to keys cycle time and comparing it against a known standard is helpful to know, but it doesn’t really help you identify specifically where in your system improvement opportunities lie. I offer a better way!
- In every computerized management system, there are three separate time segments that you should use in addition to looking at your keys to keys cycle time performance.
Vehicle In to Start
- Use this segment to measure how long it takes to get a vehicle from drop-off to production ready. “Production ready” is your shop’s definition of when the vehicle is ready to flow seamlessly through the body work and refinish stages of production. For most shops that means blueprinting has been completed, full approval from the customer and insurance companies has been obtained and all critical parts are on hand. Once this criteria has been met and there is an available technician to work on it, enter the start date. For most shops this time segment averages 1 day (same day) for jobs under $1500, two days for $1500-$4000, and five days for the heavy hit $4000+ jobs. The overall goal is three days on average for all jobs.
Repairs Started to Repairs Completed
- This is the most important segment of time because it is the only segment where anybody makes any money! For that reason, you clearly want to measure this segment of time. You can measure this segment in either days or in hours per day. Things that have the biggest effect on your success or failure while vehicles are in production are things like blueprint accuracy, parts correctness etc. Top shops will typically produce between 4.0 to 6.0 Hours per day while the vehicle is in the Started to Completed segment.
Repairs Completed to Vehicle Out
- This time segment is probably the most overlooked area of cycle time opportunity. How long does it take you to get rid of the cars when you get them finished? Your management system cycle time reports will also show you how you are performing in this time segment, assuming you are diligent about your date management.
- Take control of your cycle time performance by taking a deeper look into the individual areas that affect the overall cycle time performance. As you have heard, you cannot improve what you don’t measure. By viewing your computerized management system’s cycle time report, you can analyze this information, but you have to first be diligent with your date management.
If you would like more information about how you can apply this date management strategy at your shop, please contact me at david.luehr@elite bodyshopsolutions.com