Twitter You Tube Facebook Autobodynews Linked In

Friday, 20 October 2017 15:56

Spanesi Americas Exhibiting at SEMA, Booth 10647, North Hall

Spanesi's new 106 EXT Frame Bench Spanesi's new 106 EXT Frame Bench

Spanesi will be exhibiting at SEMA 2017, in the North Hall of the Las Vegas Convention Center, in booth #10647.


This year Spanesi has increased their booth footprint in order to display the complete 360 Concept offerings of Spray Booths, Computerized Measuring Systems, Bench Vehicle Straightening Platforms, and Welding for Collision Facilities. They will also feature many of their OEM relationships.


Spanesi's new 106 EXT Frame Bench will be among the items exhibited. The 106 EXT was designed to deliver at 6 Meters (19'8") long, an astonishing 11,000 lb lift capacity, 1,200mm (4') lift height, and offers full fixturing capability from end-to-end.

 

THE NEW 106 EXT BENCH PACKAGE INCLUDES:

• (1) Bench, with Lift and Power Unit (208V 1PH)
• (1) Ramp Kit
• (1) Hydraulic PullTower capable of producing 10 tons of pulling force
• (1) Superstar Universal Jig System w/Cabinet
• (2) Crossmembers (6 & 7)
• (2) Ramps (for Crossmembers 6 & 7)
• (2) Ramp Width Extensions
• (1) Loading Trolley
• (1) Special Jig Screw Kit with Shelf

 

Meet & Greet With KC Mathieu, owner of renowned KC's Paint Shop: Hot Rods & Restorations. KC's work was featured on Discovery's hit TV show, "Fast N' Loud". Meet KC Tuesday October 31st, from 11:30 am to 12:30 pm.

 

Spanesi is running a SEMA Show Special on a computerized measuring system.

 

Spanesi Touch computerized measuring system is easy-to-use and efficient for technicians and repair planners. Measure the vehicle on the ground, two-post lift, or on a bench. Easily document under-body, upper-body and suspension measurements at any time during the repair process. SAVE more than $1000.00 by purchasing your Touch during SEMA and get a universal cross member (see below) that allows your Touch to be used on any bench or rack for free.

 

 cross

SCRS and Spanesi are giving away one of Spanesi's brand new Q5.2 Synergic Inverter MIG/MAG welding packages to one lucky SEMA attendee. This just isn't any three torch welder either.

 

The welder, valued at more than $8,500, sports aluminum, silicon bronze and steel torches, along with, the accompanying wire. The package also includes what SCRS described as "an additional spool of Honda wire" - a reference to the 980-megapascal MAG welding wire Honda has demanded shops use since 2009. (The OEM also requires the silicon bronze MIG-brazing wire to be 0.8 mm-wide ERCuSi-A or CuSi-3.)

 

The drawing for the welder will be held at noon, Friday, Nov. 3, at the SCRS booth, North Hall #11173. To see this beautiful welder, come by the Spanesi booth in North Hall #10647 or check out our video to view the announcement made by Tim Morgan of Spanesi Americas.

 

welderspanesi

 

For more information visit: spanesi.com

Read 2489 times